Differences

This shows you the differences between two versions of the page.

--- hp_ux [2010/12/16 13:01] – michael
+++ hp_ux [2021/04/24 07:40] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 ====== HP-UX ======
+[[Software Management]]
+  * Verzeichnis der allgemeinen Cluster-Config: /etc/cmcluster.conf
   * Verzeichnis der Pakete:  /etc/cmcluster/
   * Linux TOP -> UNIX Glance
@@ Line 9: / Line 12: @@
   cmhaltpkg
   cmmodpkg -e
+  cmcheckconf -P
+  cmapplyconf -P
+  cmcheckconf -v -K -C tsmbcicl.ascii
+  cmcheckconf -v -C tsmbcicl.ascii
+  cmcheckconf -v -k -C tsmbcicl.ascii
   * Cluster-Pakete schwenken
@@ Line 82: / Line 90: @@
 Vor jedem dsmsrv start müssen die Filesysteme gemoutet werden und die Umgebungswvariablen angepasst werden.
-Die nötigen Dateien liegen unter /root/tsm/
+Die nötigen Dateien liegen unter /var/hzd/admin/tsm/
   /root/tsm/mount_tsmx
   /root/tsm/tsmx_env
@@ Line 102: / Line 110: @@
   * ioscan
-ioscan -fNC$class where class in lsdev
+ioscan -fNC $class where class in lsdev
+For HDD
+    ioscan -nfC disk
+For tape drive
+    ioscan -nfC tape
+For LAN - Ethernet Card
+    ioscan -nfC LAN
+For FC - Fiber Channel
+    ioscan -nfC FC
+WWNs herausbekommen:
+unixha1:/root# ioscan -knfC fc
+Class     I  H/W Path  Driver S/W State   H/W Type     Description
+================================================================
+fc        0  0/2/1/0   fcd   CLAIMED     INTERFACE    HP AB379-60001 4Gb Dual Port PCI/PCI-X Fibre Channel Adapter (FC Port 1)
+                      /dev/fcd0
+fc        1  0/2/1/1   fcd   CLAIMED     INTERFACE    HP AB379-60001 4Gb Dual Port PCI/PCI-X Fibre Channel Adapter (FC Port 2)
+                      /dev/fcd1
+fc        2  0/3/2/0   td    CLAIMED     INTERFACE    HP Tachyon XL2 Fibre Channel Mass Storage Adapter
+                      /dev/td2
+fc        3  0/4/2/0   td    CLAIMED     INTERFACE    HP Tachyon XL2 Fibre Channel Mass Storage Adapter
+                      /dev/td3
+fc        4  0/5/1/0   fcd   CLAIMED     INTERFACE    HP AB379-60001 4Gb Dual Port PCI/PCI-X Fibre Channel Adapter (FC Port 1)
+                      /dev/fcd4
+fc        5  0/5/1/1   fcd   CLAIMED     INTERFACE    HP AB379-60001 4Gb Dual Port PCI/PCI-X Fibre Channel Adapter (FC Port 2)
+                      /dev/fcd5
+fcmsutil /dev/fcd1 (vpd)
   * LVM
@@ Line 109: / Line 148: @@
+===== Additional Swap Space =====
+Quelle: http://h30499.www3.hp.com/t5/System-Administration/HOW-TO-INCREASE-SWAP-SPACE/td-p/5220211#.UbWaF9hvfzI
+‎01-19-2010 09:19 AM
+Hi Eric:
+You don't need to extend primary swap --- and as you have found, you can't easily do it. Generally you would re-ignite your server and choose a larger primary swap then.
+Device swap space must be allocated contiguously. That is, without intervening disk extents used or free for another logical volume.
+All this is moot. All you need to do is allocate secondary device swap somewhere. Whether or not it resides on vg00 is immaterial.
+Secondary or primary device swap are equivalent. Simply add secondary device swap.
+Do something like:
+# lvcreate -C y -r n -L 32768 -n lvolN /dev/vgXX
+# swapon -p /dev/vgXX/lvolN
+See the manpages for more information. You can do this without a reboot. Remember to add activation of the secondary device swap so built to '/etc/fstab':
+/dev/vgXX/lvolN ... swap pri=0 0 0
+As you can see, the secondary device swap can be on any volume group you choose.
+Regards!
+...JRF...
+devices:
+   vgdisplay -v vg08
+   pwe
+   pwd
+   ioscan -m lun  > lun.out
+   vi lun.out
+   ioscan -m dsf
+   vi lun.out
+   ioscan -hw_path -H 64000/0xfa00/0x186
+   ioscan -m hwpath -H 64000/0xfa00/0x186
+swlist | grep OE
+model
+machinfo
+ioscan -fnH "legacy hardware path"
+ioscan -Cdisk <-> ioscan -NCdisk
+# ioscan -NCdisk
+H/W Path  Class          Description
+====================================
+/0xfa00/0x1         disk    HP      HSV200
+/0xfa00/0x2         disk    HP      HSV200
+/0xfa00/0x3         disk    HP      HSV200
+/0xfa00/0x4         disk    HP      HSV200
+/0xfa00/0x5         disk    HP 36.4GST336753LC
+/0xfa00/0x6         disk    HP 73.4GST373454LC
+/0xfa00/0x7         disk    HP 73.4GST373454LC
+/0xfa00/0x8         disk    TEAC    DV-28E-C
+ioscan -uC disk  (u = usable = kein echter scan)
+# ioscan -m hwpath -H 0/4/1/0.6.37.0.0.0.4
+Lun H/W Path      Lunpath H/W Path                 Legacy H/W Path
+====================================================================
+/0xfa00/0x4
+/4/1/0.0x50001fe1501077ad.0x4004000000000000   0/4/1/0.6.37.0.0.0.4
+Physik zur Logik:
+# ioscan -m lun -H 64000/0xfa00/0x4
+Class     I  Lun H/W Path  Driver  S/W State   H/W Type     Health  Description
+======================================================================
+disk     79  64000/0xfa00/0x4   esdisk  CLAIMED     DEVICE       online  HP      HSV200
+/3/1/0.0x50001fe1501077ac.0x4004000000000000
+/3/1/0.0x50001fe1501077ad.0x4004000000000000
+/3/1/0.0x50001fe1501077a8.0x4004000000000000
+/3/1/0.0x50001fe1501077a9.0x4004000000000000
+/4/1/0.0x50001fe1501077ac.0x4004000000000000
+/4/1/0.0x50001fe1501077ad.0x4004000000000000
+/4/1/0.0x50001fe1501077a8.0x4004000000000000
+/4/1/0.0x50001fe1501077a9.0x4004000000000000
+                      /dev/disk/disk79   /dev/rdisk/disk79
+Get legacy pathes to agile device:
+# ioscan -m dsf /dev/disk/disk79
+Persistent DSF           Legacy DSF(s)
+========================================
+/dev/disk/disk79         /dev/dsk/c9t0d4
+                         /dev/dsk/c11t0d4
+                         /dev/dsk/c5t0d4
+                         /dev/dsk/c7t0d4
+                         /dev/dsk/c17t0d4
+                         /dev/dsk/c19t0d4
+                         /dev/dsk/c13t0d4
+                         /dev/dsk/c15t0d4
+root@rx26-137   [/root]
+# ioscan -m dsf /dev/dsk/c9t0d4
+Persistent DSF           Legacy DSF(s)
+========================================
+/dev/disk/disk79         /dev/dsk/c9t0d4
+GET WWIF FOR DISK
+# scsimgr get_attr -a wwid -D /dev/rdisk/disk79
+        SCSI ATTRIBUTES FOR LUN : /dev/rdisk/disk79
+name = wwid
+current = 0x600508b40007551c0000f00043260000
+default =
+saved =
+IOFIND output. Preview list of ...
+SUMMARY:
+--------
+Legacy dsf list                      : /var/adm/iofind/logs/093013_070610/pathDSFlist.txt
+Files matching legacy dsfs           : /var/adm/iofind/logs/093013_070610/dsf_match_files.txt
+Device file mapping                  : /var/adm/iofind/logs/093013_070610/DSFmapping.txt
+Files searched upon for legacy       : None.
+iofind file search exclusion list    : /var/adm/iofind/cfg/iofind_exclude.cfg
+Summary log                          : /var/adm/iofind/logs/093013_070610/summary.txt
+UPDATES:
+Software.hp.com
+# iofind -n -i /tmp/DSFs -R -p
+  *Creating the files to search upon. Based on the directory
+   specified this could take a long time. Note that, directories
+   and files specified in /var/adm/iofind/cfg/iofind_exclude.cfg
+   will be omitted during search. You may edit and customize
+   as you need.
+  *Compiling device file list.
+  *Beginning the device file search.
+    The following occurrences of /dev/dsk/c5t0d1 was found in file /tmp/DSFs:
+    FileName:Line Number: Matching Pattern
+    ______________________________________
+    /tmp/DSFs:3:/dev/dsk/c5t0d1
+Do you want iofind to replace /dev/dsk/c5t0d1 with /dev/disk/disk76 :(Y)Yes;(N)No;Q(Quit) ?
+Do you want iofind to replace /dev/dsk/c5t0d1 with /dev/disk/disk76 :(Y)Yes;(N)No;Q(Quit) ?
+Do you want iofind to replace /dev/dsk/c5t0d1 with /dev/disk/disk76 :(Y)Yes;(N)No;Q(Quit) ?Y
+  Replaced /dev/dsk/c5t0d1 with /dev/disk/disk76 in file /var/adm/iofind/logs/093013_081520/preview//tmp/DSFs
+    The following occurrences of /dev/dsk/c7t0d1 was found in file /tmp/DSFs:
+    FileName:Line Number: Matching Pattern
+    ______________________________________
+    /tmp/DSFs:7:/dev/dsk/c7t0d1
+Do you want iofind to replace /dev/dsk/c7t0d1 with /dev/disk/disk76 :(Y)Yes;(N)No;Q(Quit) ?Y
+  Replaced /dev/dsk/c7t0d1 with /dev/disk/disk76 in file /var/adm/iofind/logs/093013_081520/preview//tmp/DSFs
+    The following occurrences of /dev/dsk/c9t0d1 was found in file /tmp/DSFs:
+# drd clone -t /dev/disk/disk87
+=======  09/30/13 08:12:29 EDT  BEGIN Clone System Image (user=root)  (jobid=rx26-137)
+       * Reading Current System Information
+       * Selecting System Image To Clone
+       * Selecting Target Disk
+       * Selecting Volume Manager For New System Image
+       * Analyzing For System Image Cloning
+       * Creating New File Systems
+       * Copying File Systems To New System Image
+       * Making New System Image Bootable
+       * Unmounting New System Image Clone
+=======  09/30/13 08:44:23 EDT  END Clone System Image succeeded. (user=root)  (jobid=rx26-137)
+root@rx26-137   [/root]
+# drd status
+=======  09/30/13 08:46:35 EDT  BEGIN Displaying DRD Clone Image Information (user=root)  (jobid=rx26-137)
+       * Clone Disk:               /dev/disk/disk87
+       * Clone EFI Partition:      AUTO file present, Boot loader present
+       * Clone Rehost Status:      SYSINFO.TXT not present
+       * Clone Creation Date:      09/30/13 08:12:41 EDT
+       * Last Sync Date:           None
+       * Clone Mirror Disk:        None
+       * Mirror EFI Partition:     None
+       * Original Disk:            /dev/disk/disk86
+       * Original EFI Partition:   AUTO file present, Boot loader present
+       * Original Rehost Status:   SYSINFO.TXT not present
+       * Booted Disk:              Original Disk (/dev/disk/disk86)
+       * Activated Disk:           Original Disk (/dev/disk/disk86)
+=======  09/30/13 08:46:50 EDT  END Displaying DRD Clone Image Information succeeded. (user=root)  (jobid=rx26-137)
+scsimgr get_stat -C disk -I 52
+scsimgr inquiry  -C disk -I 52
+while bdf
+do
+sleep 5
+done
+/etc/autoparms.log
+===== Errors für devices auslesen =====
+Alle LUNs:
+    scsimgr get_stat all_lun |grep -e LUN -e failures |more
+oder einzelne devices:
+    scsimgr get_stat -D /dev/rmt/j1a_03_e10 all_lpt
+ioscan -kfnC fc
+The devices on my system are /dev/td0, etc. To show info including WWN, run:
+    /opt/fcms/bin/fcmsutil /dev/td0