san
This is an old revision of the document!
Kommando “sfpshow [Portnummer]” auf dem Switch ausführen. RX und TX Power Werte über 100 uW sind in Ordnung.
Zoning Commands
alicreate “Name”, “domain,port#” Used to create an alias alicreate “Name”,”portname1; portname2″ To create multiple ports under a single alias alidelete “Name” To delete an alias aliadd “Name”, “domain,port#” To add additional ports to an alias aliremove “Name”, “domain,port#” To remove a port from the alias alishow “AliName” To show the alias configuration on the switch zonecreate “Zone Name”, “alias1; alias2″ To create zones based on alias zonedelete “ZoneName” To delete a zone zoneadd “ZoneName”, “alias name” To add additional alias into the zone zoneremove “ZoneName”, “alias name” To remove an alias from the zone zoneshow “zoneName” To show the zone configuration information cfgcreate “Configname”, “Zone1; Zone2″ To create configurations by adding in zones cfgdelete “ConfigName” To delete a configuration cfgadd “ConfigName”, “Zone3″ To add additional zones in the configuration cfgremove “ConfigName”, “Zone3″ To remove a zone from the configuration cfgshow “ConfigName” To show the details of that configuration cfgenable “ConfigName” To enable a configuration on the switch cfgsave To have the effective configuration to be written into the flash memory
Show Commands
psshow Displays the status of the power supply fansshow Displays the status of the fans tempshow Displays the status of the temperature readings sensorshow Displays the status of the sensor readings nsshow Displays information in the name server nsshow -t Displays information in the name server nsshow -r Displays the information in the name server along with the state change registration details nscamshow Displays detailed information of all the devices connected to all the switches in the fabric (Remote Name Servers) nsallshow Displays the 24 bit address of all devices that are in the fabric licenseshow Displays all the licenses that have been added in the switch date Displays the current date set on the switch bannershow Displays the banner that will appear when logging in using the CLI or web tools httpcfgshow Displays the JAVA version the switch expects at the management console switchname Displays the name of the switch fabricshow Displays information of all the switches in the fabric userconfig –show -a Displays the account information like role , description , password exp date , locked status switchstatusshow Displays the overall status of the switch switchstatuspolicyshow Displays policy set for the switch regarding Marginal(Yellow) or Down(Red) error status portshow To show the port status portcfgshow Displays the speed set for all ports on all slots and other detailed port information configshow fabric.ops Displays the parameters of the switch. Ensure all switches in a fabric have the same parameters in order to communicate configshow fabric.ops.pidFormat Displays the PID set for a switch Core , Native or Extended edge switchuptime OR uptime Displays the uptime for the switch firmwareshow Displays the firmware on the switch version Displays the current firmware version on the switch hashow Displays the status of local and remote CP’s. High availability , heartbeat and synchronization
Port Settings
portcfgshow Displays the port settings portcfg rscnsupr [slot/port] –enable A registered state change registration is suppressed when a state change occurs on the port portcfg rscnsupr [slot/port] –disable A registered state change registration is sent when a state change occurs on the port portname To assign a name for a port portdisable To disable a port or slot portenable To enable a port or slot portcfgpersistentdisable To disable a port , status would not change even after rebooting the switch portcfgpersistentenable To enable a port , status would not change even after rebooting the switch portshow To show the port status portcfgspeed , To set speed for a port#te – 0:auto negotiated 1,2,4 Gbit/sec , 1 : 1Gbit/sec , 2 : 2 Gbit/sec , 4 : 4Gbit/sec switchcfgspeed To set speed for all the ports on the switch Note – 0:auto negotiated 1,2,4 Gbit/sec , 1 : 1Gbit/sec , 2 : 2 Gbit/sec , 4 : 4Gbit/sec portcfgshow Displays the speed set for all ports on all slots and other detailed port information portcfgdefault To set the port settings to default portcfglongdistance To set the long distance mode . Default is L0(Normal), as per distance will display LE <=10 kms , L0.5 <=25kms , L1 <=50 kms, L2<=100kms , LD=auto , LS = Static portcfgeport Used to disable a port from being a E port
Time and Date Settings
date Displays the current date set on the switch tsclockserver 10.10.1.1 Instruction for the principal switch to synchronize time with the NTP server (specify the ip address of the NTP server) tsclockserver LOCL Instruction to stop NTP server synchronization (Local time of the switch) date mmddhhmmyy To set the time of the switch when the NTP server synchronization is cancelled tstimezone -5 To set the time zone for individual switches
License Commands
licenseshow Displays all the licenses that are added in the switch licenseadd To add a new license to the switch licenseremove To remove a license from the switch licenseidshow Based on Switch WWN
Banner Commands
bannershow Displays the banner that will appear when logging in using the CLI or web tools bannerset To set the banner which will appear when logging in using the CLI or web tools bannerset “” To remove the bannerset (two quotes)
Password commands
passwd To change the password for that particular login passwdcfg –set -lowercase 3 uppercase 1 -digits 2 -punctuation 2 -minlength 10 -history 3 To set the password rules passwdcfg –set -minpasswordage 1 To set the minimum password age in Days passwdcfg –set -maxpasswordage 30 To set the maximum password age in Days passwdcfg –set -warning 23 To set a warning for the expiration Days remaining passwdcfg –set -lockoutthreshold 5 To set the account lockout thresh hold passwdcfg –set -lockoutduration 30 To set the account lockout duration in Minutes passwdcfg –setdefault To restore the password policy to Factory settings (min length – 8, history -1 , lockoutduration – 30)
SNMP Commands
snmpconfig snmpconfig for 5.0 above fos agtcfgset snmp config for fos below 5.0 snmpmibcapset for choosing the MIB’s for the snmp settings
User Configuration
userconfig –show -a / userconfig –show Displays all the account information like role , description , password expiration date , locked status userconfig –add john -r admin -d “John Doe” To add a new account -r = role , -d = description userconfig –show john Displays all the information for the account john userconfig –change -e no To Disable an account , usually default a/cs like admin and user . But ensure before disabling the admin a/c there is another a/c with admin rights userconfig –change -e yes To Enable an account
Firmware commands
configupload Saves the switch config as an ASCII text file to an FTP server configdownload To restore a switch configuration from ASCII text file Note – Need to disable the switch before downloading the config file configure => cfgload attributes : [y] => Ensure secure config upload / download : [y] Fabric OS v 4.4 & above provides Secure File Copy Protocol (SCP) during upload or download of configurations firmwaredownload To download the firmware to be installed on the switch firmwareshow To be run after installing the firmware on the switch version Displays the current firmware version on the switch fastboot Needs to be run after installing the firmware. This does not include the post. reboot Needs to be run after installing the firmware. This includes the post.
Miscellaneous commands
killtelnet To kill a particular session which is using telnet configure To configure a switch quietmode To switch off the quiet mode quietmode 1 To suppress messages to the console switchname Displays the switch name switchname “EXAMPLE” To assign a switch name bannerset To set the banner which will appear when logging in using the CLI or web tools timeout Displays the timeout time set for Telnet session on the switch timeout 10 To set a specific timeout time for the Telnet session switchuptime or uptime Displays the uptime for the switch switchcfgspeed To set speed for all the ports on the switch Note – 0:auto negotiated 1,2,4 Gbit/sec , 1 : 1Gbit/sec , 2 : 2 Gbit/sec , 4 : 4Gbit/sec fastboot To reboot the switch without post reboot To reboot the switch with the post switchstatusshow Displays the overall status of the switch switchstatuspolicyshow Displays policy set for the switch regarding Marginal(Yellow) or Down(Red) error status switchstatuspolicyset To change the policy set for the switch regarding Marginal(Yellow) or Down(Red) error status
san.1438677029.txt.gz · Last modified: 2021/04/24 07:38 (external edit)